Installing EAF on R&P Focuser

Updated Aug 28, 2025• by WO Team 3 min read

page icon
Applicable to all WO R&P focusers, including:
  • WIFD R&P Focuser
  • 2” R&P Focuser
  • 2.5” R&P Focuser
  • 3.3” R&P Focuser
  • 3.7” R&P Focuser
notion image
  1. Turn the telescope over and remove the Tension screw.
notion image
  1. Remove the top cover screw near the temperature gauge with 2mm Allen key.
Starting from June 2025, new telescope models no longer include the top cover screw. (Skip Step 2)
notion image
  1. Release (don’t remove) two inner knob screws.
notion image
  1. Remove the temperature gauge knob.
notion image
  1. Find the flat side on the shaft and turn it to face the hole.
notion image
  1. Put the 5-6mm Flexible coupling on the shaft and lock the two inner screws.
notion image
  1. Put the EAF body on and lock the two inner screws.
On Step 6 & 7:
Please make sure one of the screws is lock on the flat side (D-cut profile)
invert
notion image
  1. Align the screw holes.
notion image
  1. Lock the four M4 bracket screws.
notion image
 

Copyright © 1996-2025 William Optics. All rights reserved.